Outcome and predictive factors for perforation in orthodontic rubber band-assisted endoscopic submucosal dissection of fibrotic colorectal lesions.

Endoscopic submucosal dissection (ESD) of fibrotic colorectal lesions is difficult and has a high complication rate. There are only a few reports on the utility of orthodontic rubber band (ORB) traction in reducing the difficulty of this procedure. This study aimed to investigate the risk factors for perforation when applying ORB traction during ESD of fibrotic colorectal lesions. We continuously collected the clinical data of 119 patients with fibrotic colorectal lesions who underwent ESD with ORB and clip traction between January 2019 and January 2024. Possible risk factors for perforation were analyzed. The median ORB-ESD operative time was 40 (IQR 28-62) min, and the en bloc and R0 resection rates were 94.1% and 84.0%, respectively. Perforation occurred in 16 of 119 patients (13.4%). The lesion size, lesion at the right half of the colon or across an intestinal plica, the degree of fibrosis, operation time, and the surgeon's experience were associated with perforation during ORB-ESD (P < 0.05). Multivariate logistic regression analysis showed that lesions in the right colon (OR 9.027; 95% CI 1.807-45.098; P = 0.007) and those across an intestinal plica (OR 7.771; 95% CI 1.298-46.536; P = 0.025) were independent risk factors for perforation during ORB-ESD. ORB-ESD is an effective and feasible approach to treat fibrotic colorectal lesions. Adequate preoperative evaluation is required for lesions in the right colon and across intestinal plicas to mitigate the risk of perforation.

New Generation of Orthodontic Elastomeric Ligature to Prevent Enamel Demineralization In Vivo.

This study aimed to synthesize a novel elastomeric ligature with dimethylaminohexadecyl methacrylate (DMAHDM) grafted, providing a new strategy for improving the issue of enamel demineralization during fixed orthodontics. DMAHDM was incorporated into elastomeric ligatures at different mass fractions using ultraviolet photochemical grafting. The antibacterial properties were evaluated and the optimal DMAHDM amount was determined based on cytotoxicity assays. Moreover, tests were conducted to evaluate the in vivo changes in the mechanical properties of the elastomeric ligatures. To assess the actual in vivo effectiveness in preventing enamel demineralization, a rat demineralization model was established, with analyses focusing on changes in surface microstructure, elemental composition, and nanomechanical properties. Elastomeric ligatures with 2% DMAHDM showed excellent biocompatibility and the best antibacterial properties, reducing lactic acid production by 65.3% and biofilm bacteria by 50.0% within 24 h, without significant mechanical property differences from the control group (p > 0.05). Most importantly, they effectively prevented enamel demineralization in vivo, enhancing elastic modulus by 73.2% and hardness by 204.8%. Elastomeric ligatures incorporating DMAHDM have shown great potential for application in preventing enamel demineralization, providing a new strategy to solve this issue during fixed orthodontics.

Well-Being of Orthodontic Patients Wearing Orthodontic Appliances.

Background and Objectives: Orthodontic appliances may cause discomfort for patients. This could influence the person's psychological well-being. The aim of this study was to examine the psychological health of patients wearing orthodontic appliances. It is important to analyze the well-being of patients during orthodontic treatment because it is started in a young age and it may affect one's psychological health. Therefore, for doctors and patients, it is important to understand and take every aspect of the treatment into consideration when deciding when to start the treatment and what appliance to choose. Materials and Methods: A total of 339 patients filled out an anonymous questionnaire. They were divided into four groups according to their age and type of appliance. The main reasons to seek treatment were crooked teeth and a bad bite. There was a statistically significant difference between women and men as women sought treatment because of crooked teeth; meanwhile, men indicated bad bite as their main reason for seeking treatment. Results: A total of 48.7% of subjects noted that they were feeling good during treatment; however, 4% of all patients noted that they were feeling bad. A total of 45% of subjects stated that they felt unhappy at least sometimes. A total of 43% of subjects felt stress. Conclusions: Even though patients indicated various negative aspects on their well-being during treatment, for the majority of the subjects, the end results significantly increased their psychological well-being.

Novel antibacterial orthodontic elastomeric ligature with oral biofilm-regulatory ability to prevent enamel demineralization.

OBJECTIVES: To synthesize a novel antibacterial orthodontic elastomeric ligature incorporating dimethylaminohexadecyl methacrylate (DMAHDM) for the first time to prevent enamel demineralization during orthodontic therapy. METHODS: Various mass fractions of DMAHDM (ranging from 0 % to 20 %) were grafted onto commercial elastomeric ligatures using an ultraviolet photochemical grafting method and were characterized. The optimal DMAHDM concentration was determined based on biocompatibility and mechanical properties, and the antibacterial efficacy was evaluated in a whole-plaque biofilm model. TaqMan real-time polymerase chain reaction and fluorescence in situ hybridization were used to assess the microbial regulatory ability of the multispecies biofilms. Furthermore, an in vitro tooth demineralization model was established to explore its preventive effects on enamel demineralization. Statistical analysis involved a one-way analysis of variance and LSD post hoc tests at a significance level of 0.05. RESULTS: The elastomeric ligature containing 2 % mass fraction of DMAHDM exhibited excellent mechanical properties, favorable biocompatibility, and the most effective antibacterial ability against microorganisms, which decreased by almost two logarithms (P < 0.05). It significantly reduced the proportion of Streptococcus mutans in the multispecies plaque biofilm by 25 % at 72 h, leading to an enhanced biofilm microenvironment. Moreover, the novel elastomeric ligature demonstrated an obvious preventive effect on enamel demineralization, with an elastic modulus 30 % higher and hardness 62 % higher than those of the control group within 3 months (P < 0.05). SIGNIFICANCE: The integration of DMAHDM with an elastomeric ligature holds significant promise for regulating biofilms and preventing enamel demineralization in orthodontic applications.

Interdisciplinary Role of Orthodontist in Screening and Managing Obstructive Sleep Apnea in Children and Adults.

Obstructive sleep apnea (OSA) can affect children and adults, and, if left untreated, could have a major impact on the general and overall well-being of the patient. Dental health care providers and orthodontists have an interdisciplinary role in screening patients at risk for OSA and make a referral to establish a definitive diagnosis by a sleep physician. The gold standard of diagnostic testing is polysomnography. The adeno-tonsillar hypertrophy is the primary cause of sleep apnea in children; therefore, adeno-tonsillectomy must be the first line of treatment. Post adeno-tonsillectomy, if there is residual OSA due to underlying skeletal discrepancy, the patient may be referred to an orthodontist for appropriate management. Currently the evidence in the literature for prophylactic growth modification in children to prevent OSA is weak. In adults, the gold standard for managing OSA is Positive Airway Pressure (PAP) therapy; however, adherence to this treatment is rather low. The oral appliance (OA) therapy is an alternate for PAP intolerant patients and for mild to moderate OSA patients. The OA therapy has to be administered by a qualified dentist or orthodontist after careful examination of dental and periodontal health as well as any pre-existing joint conditions. The OA therapy could cause OA-associated malocclusion and patients have to be made aware of prior to initiating treatment. In patients with severe OSA, surgical maxilla-mandibular advancement (MMA) is highly effective.

A novel acrylic orthodontic device for treatment of linguoverted mandibular canine teeth in small dogs.

Linguoverted mandibular canine teeth (LMC) is a common malocclusion in dogs. Several inclined bite-plane techniques using acrylic resin have been introduced to correct LMC in dogs. Although these techniques have suggested modifications to overcome shortcomings, there are still limitations; e.g., high technical sensitivity, as the viscous acrylic resin must still be fabricated in the oral cavity. The authors developed a novel method for small-breed dogs that uses a doughy acrylic resin form to achieve an easy intraoral design and extraoral fabrication. Eight small-breed dogs were presented to evaluate and treat malocclusion causing palatal trauma. First, a Class-1 malocclusion with linguoversion of the mandibular canine teeth (6 dogs with unilateral LMC and 2 dogs with bilateral) was diagnosed based on oral examination. Dogs were treated with the new method using a doughy acrylic resin form for 6 to 7 wk and had posttreatment follow-up 1 y after the procedure. All treated canine teeth were in correct positions 1 y after the appliances were removed. Key clinical message: The authors believe that the new method using a doughy acrylic resin form could be a good alternative for veterinarians to use when treating LMC.

Un nouveau dispositif orthodontique en acrylique pour le traitement des canines mandibulaires linguoverties chez les petits chiens. Les canines mandibulaires linguoverties (LMC) sont une malocclusion courante chez le chien. Plusieurs techniques de plan de morsure incliné utilisant de la résine acrylique ont été introduites pour corriger la LMC chez le chien. Bien que ces techniques aient suggéré des modifications pour surmonter les lacunes, elles présentent encore des limites; par exemple, une sensibilité technique élevée, car la résine acrylique visqueuse doit encore être fabriquée dans la cavité buccale. Les auteurs ont développé une nouvelle méthode pour les chiens de petite race qui utilise une forme pâteuse de résine acrylique pour obtenir une conception intra-orale et une fabrication extra-orale faciles. Huit chiens de petite race ont été présentés pour évaluer et traiter une malocclusion provoquant un traumatisme palatin. Tout d'abord, une malocclusion de classe 1 avec linguoversion des canines mandibulaires (6 chiens avec LMC unilatérale et 2 chiens avec bilatérale) a été diagnostiquée sur la base d'un examen oral. Les chiens ont été traités avec la nouvelle méthode en utilisant une forme pâteuse de résine acrylique pendant 6 à 7 semaines et ont fait l'objet d'un suivi post-traitement 1 an après la procédure. Toutes les canines traitées étaient dans la bonne position un an après le retrait des appareils.Message clinique clé:Les auteurs estiment que la nouvelle méthode utilisant une forme pâteuse de résine acrylique pourrait être une bonne alternative que les vétérinaires pourraient utiliser lors du traitement du LMC.(Traduit par Dr Serge Messier).

A systematic review of the clinical outcomes for various orthodontic and physiotherapy appliances used for the management of temporomandibular joint ankylosis.

Ankylosis of the temporomandibular joint (TMJ) is associated with restricted mandibular movements, with deviation to the affected side. The management of TMJ ankylosis involves surgery to mitigate the effects of ankylosis, and adjunctive appliance therapy to supplement the results achieved through surgery. Several appliances have been used to help maintain jaw mobility postsurgery, but have been rarely documented in the literature. Our systematic review aimed to examine the clinical outcomes of various appliances for TMJ ankylosis management. A comprehensive electronic search of the literature was performed in July 2022 to identify eligible articles that had tested the use of orthodontic or physiotherapy appliances for the management of TMJ ankylosis. In total, 13 publications were included in the narrative synthesis. Both generic and custom-made appliances were used, with overall findings suggesting that using these appliances improved mouth opening and reduced chances of re-ankylosis. In this review no universally accepted appliance was found to be utilized, and the criteria used for appliance selection were unclear. The field of research in developing appliances for the treatment of TMJ ankylosis is open to advancement, and this review will help guide future research in this area.

Digital setup accuracy for moderate crowding correction with fixed orthodontic appliances: a prospective study.

OBJECTIVES: To evaluate the accuracy of a semi-automatic 3D digital setup process in predicting the orthodontic treatment outcome achieved by labial fixed appliances. SUBJECTS AND METHODS: Twenty-five adult patients (18 to 24 years old) with class I malocclusion and moderate crowding were prospectively enrolled and received treatment on both jaws through the straight-wire technique. Prior to treatment commencement, a semi-automatic digital setup simulating the predicted treatment outcome was performed for each patient through Orthoanalyzer software (3Shape®, Copenhagen, Denmark) to obtain the prediction model. This was compared to the final outcome model through 3D superimposition methods. Metric variables and inspection of color-coded distance maps were used to detect how accurately the digital setup predicts the actual treatment outcome. RESULTS: The mean absolute distances (MAD) between the superimposed dental arches of the predicted and the final models were: 0.77 ± 0.13 mm following superimposition on the palate, 0.52 ± 0.06 mm following superimposition on the maxillary dental arch, and 0.55 ± 0.15 mm following superimposition on the mandibular dental arch. The MAD at the palatal reference area was 0.09 ± 0.04 mm. Visualization of color-coded distance maps indicated that the digital setup accurately predicted the final teeth position in a few cases. Almost half of the cases had posteriorly wider upper and lower dental arches and palatally/lingually positioned or inclined anterior teeth, whereas the rest still showed errors within 2-3 mm, distributed over the entire dental arches with no distinct pattern. CONCLUSIONS: The accuracy of semi-automatic prediction of the labial fixed appliance treatment outcome in Class I cases with moderate crowding is not yet sufficient. While average measures showed deviations less than 1 mm, examination of individual color-coded distance maps revealed significant disparities between the simulated and the actual results.

Systematic review on effects of experimental orthodontic tooth displacement on brain activation assessed by fMRI.

BACKGROUND: Orthodontic treatment is often accompanied by discomfort and pain in patients, which are believed to be a result of orthodontic tooth displacement caused by the mechanical forces exerted by the orthodontic appliances on the periodontal tissues. These lead to change blood oxygen level dependent response in related brain regions. OBJECTIVE: This systematic review aims to assess the impact of experimental orthodontic tooth displacement on alterations in central nervous system activation assessed by tasked based and resting state fMRI. MATERIALS AND METHODS: A literature search was conducted using online databases, following PRISMA guidelines and the PICO framework. Selected studies utilized magnetic resonance imaging to examine the brain activity changes in healthy participants after the insertion of orthodontic appliances. RESULTS: The initial database screening resulted in 791 studies. Of these, 234 were duplicates and 547 were deemed irrelevant considering the inclusion and exclusion criteria. Of the ten remaining potential relevant studies, two were excluded during full-text screening. Eight prospective articles were eligible for further analysis. The included studies provided evidence of the intricate interplay between orthodontic treatment, pain perception, and brain function. All of the participants in the included studies employed orthodontic separators in short-term experiments to induce tooth displacement during the early stage of orthodontic treatment. Alterations in brain activation were observed in brain regions, functional connectivity and brain networks, predominantly affecting regions implicated in nociception (thalamus, insula), emotion (insula, frontal areas), and cognition (frontal areas, cerebellum, default mode network). CONCLUSIONS: The results suggest that orthodontic treatment influences beyond the pain matrix and affects other brain regions including the limbic system. Furthermore, understanding the orthodontically induced brain activation can aid in development of targeted pain management strategies that do not adversely affect orthodontic tooth movement. Due to the moderate to serious risk of bias and the heterogeneity among the included studies, further clinical trials on this subject are recommended.

Nanotechnology in Orthodontics: Unveiling Pain Mechanisms, Innovations, and Future Prospects of Nanomaterials in Drug Delivery.

Orthodontic pain is characterized by sensations of tingling, tooth discomfort, and intolerance. According to the oral health report, over forty percent of children and adolescents have undergone orthodontic treatment. The efficacy of orthodontic treatment involving braces can be compromised by the diverse levels of discomfort and suffering experienced by patients, leading to suboptimal treatment outcomes and reduced patient adherence. Nanotechnology has entered all areas of science and technology. This review provides an overview of nanoscience, its application in orthodontics, the underlying processes of orthodontic pain, effective treatment options, and a summary of recent research in Nano-dentistry. The uses of this technology in healthcare span a wide range, including enhanced diagnostics, biosensors, and targeted drug delivery. The reason for this is that nanomaterials possess distinct qualities that depend on their size, which can greatly enhance human well-being and contribute to better health when effectively utilized. The field of dentistry has also experienced significant advancements, particularly in the past decade, especially in the utilization of nanomaterials and technology. Over time, there has been an increase in the availability of dental nanomaterials, and a diverse array of these materials have been extensively studied for both commercial and therapeutic purposes.

Validation of a double-semicircular notched configuration for mechanical testing of orthodontic thermoplastic aligner materials.

The potential of using specimens with a double-semicircular-notched configuration for performing tensile tests of orthodontic thermoplastic aligner materials was explored. Unnotched and double-semicircular-notched specimens were loaded in tension using a universal testing machine to determine their tensile strength, while finite element analysis (FEA) and digital image correlation (DIC) were used to estimate stress and strain, respectively. The shape did affect the tensile strength, demonstrating the importance of unifying the form of the specimen. During the elastic phase under tension, double-semicircular-notched specimens showed similar behavior to unnotched specimens. However, great variance was observed in the strain patterns of the unnotched specimens, which exhibited greater chance of end-failure, while the strain patterns of the double-semicircular-notched specimens showed uniformity. Considerable agreement between the theoretical (FEA) and practical models (DIC) further confirmed the validity of the double-semicircular-notched models.

Orthodontic treatment for prominent lower front teeth (Class III malocclusion) in children.

BACKGROUND: Prominent lower front teeth (Class III malocclusion) may be due to jaw or tooth position or both. The upper jaw (maxilla) can be too far back or the lower jaw (mandible) too far forward; the upper front teeth (incisors) may be tipped back or the lower front teeth tipped forwards. Orthodontic treatment uses different types of braces (appliances) fitted inside or outside the mouth (or both) and fixed to the teeth. A facemask is the most commonly reported non-surgical intervention used to correct Class III malocclusion. The facemask rests on the forehead and chin, and is connected to the upper teeth via an expansion appliance (known as 'rapid maxillary expansion' (RME)). Using elastic bands placed by the wearer, a force is applied to the top teeth and jaw to pull them forwards and downward. Some orthodontic interventions involve a surgical component; these go through the gum into the bone (e.g. miniplates). In severe cases, or if orthodontic treatment is unsuccessful, people may need jaw (orthognathic) surgery as adults. This review updates one published in 2013. OBJECTIVES: To assess the effects of orthodontic treatment for prominent lower front teeth in children and adolescents. SEARCH METHODS: An information specialist searched four bibliographic databases and two trial registries up to 16 January 2023. Review authors screened reference lists. SELECTION CRITERIA: We looked for randomised controlled trials (RCTs) involving children and adolescents (16 years of age or under) randomised to receive orthodontic treatment to correct prominent lower front teeth (Class III malocclusion), or no (or delayed) treatment. DATA COLLECTION AND ANALYSIS: We used standard methodological procedures expected by Cochrane. Our primary outcome was overjet (i.e. prominence of the lower front teeth); our secondary outcomes included ANB (A point, nasion, B point) angle (which measures the relative position of the maxilla to the mandible). MAIN RESULTS: We identified 29 RCTs that randomised 1169 children (1102 analysed). The children were five to 13 years old at the start of treatment. Most studies measured outcomes directly after treatment; only one study provided long-term follow-up. All studies were at high risk of bias as participant and personnel blinding was not possible. Non-surgical orthodontic treatment versus untreated control We found moderate-certainty evidence that non-surgical orthodontic treatments provided a substantial improvement in overjet (mean difference (MD) 5.03 mm, 95% confidence interval (CI) 3.81 to 6.25; 4 studies, 184 participants) and ANB (MD 3.05°, 95% CI 2.40 to 3.71; 8 studies, 345 participants), compared to an untreated control group, when measured immediately after treatment. There was high heterogeneity in the analyses, but the effects were consistently in favour of the orthodontic treatment groups rather than the untreated control groups (studies tested facemask (with or without RME), chin cup, orthodontic removable traction appliance, tandem traction bow appliance, reverse Twin Block with lip pads and RME, Reverse Forsus and mandibular headgear). Longer-term outcomes were measured in only one study, which evaluated facemask. It presented low-certainty evidence that improvements in overjet and ANB were smaller at 3-year follow-up than just after treatment (overjet MD 2.5 mm, 95% CI 1.21 to 3.79; ANB MD 1.4°, 95% CI 0.43 to 2.37; 63 participants), and were not found at 6-year follow-up (overjet MD 1.30 mm, 95% CI -0.16 to 2.76; ANB MD 0.7°, 95% CI -0.74 to 2.14; 65 participants). In the same study, at the 6-year follow-up, clinicians made an assessment of whether surgical correction of participants' jaw position was likely to be needed in the future. A perceived need for surgical correction was observed more often in participants who had not received facemask treatment (odds ratio (OR) 3.34, 95% CI 1.21 to 9.24; 65 participants; low-certainty evidence). Surgical orthodontic treatment versus untreated control One study of 30 participants evaluated surgical miniplates, with facemask or Class III elastics, against no treatment, and found a substantial improvement in overjet (MD 7.96 mm, 95% CI 6.99 to 8.40) and ANB (MD 5.20°, 95% CI 4.48 to 5.92; 30 participants). However, the evidence was of low certainty, and there was no follow-up beyond the end of treatment. Facemask versus another non-surgical orthodontic treatment Eight studies compared facemask or modified facemask (with or without RME) to another non-surgical orthodontic treatment. Meta-analysis did not suggest that other treatments were superior; however, there was high heterogeneity, with mixed, uncertain findings (very low-certainty evidence). Facemask versus surgically-anchored appliance There may be no advantage of adding surgical anchorage to facemasks for ANB (MD -0.35, 95% CI -0.78 to 0.07; 4 studies, 143 participants; low-certainty evidence). The evidence for overjet was of very low certainty (MD -0.40 mm, 95% CI -1.30 to 0.50; 1 study, 43 participants). Facemask variations Adding RME to facemask treatment may have no additional benefit for ANB (MD -0.15°, 95% CI -0.94 to 0.64; 2 studies, 60 participants; low-certainty evidence). The evidence for overjet was of low certainty (MD 1.86 mm, 95% CI 0.39 to 3.33; 1 study, 31 participants). There may be no benefit in terms of effect on ANB of alternating rapid maxillary expansion and constriction compared to using expansion alone (MD -0.46°, 95% CI -1.03 to 0.10; 4 studies, 131 participants; low-certainty evidence). AUTHORS' CONCLUSIONS: Moderate-certainty evidence showed that non-surgical orthodontic treatments (which included facemask, reverse Twin Block, orthodontic removable traction appliance, chin cup, tandem traction bow appliance and mandibular headgear) improved the bite and jaw relationship immediately post-treatment. Low-certainty evidence showed surgical orthodontic treatments were also effective. One study measured longer-term outcomes and found that the benefit from facemask was reduced three years after treatment, and appeared to be lost by six years. However, participants receiving facemask treatment were judged by clinicians to be less likely to need jaw surgery in adulthood. We have low confidence in these findings and more studies are required to reach reliable conclusions. Orthodontic treatment for Class III malocclusion can be invasive, expensive and time-consuming, so future trials should include measurement of adverse effects and patient satisfaction, and should last long enough to evaluate whether orthodontic treatment in childhood avoids the need for jaw surgery in adulthood.

Percentage of patients shifting to another treatment modality: An experience-guided decision.

OBJECTIVE: This study aimed to assess the frequency with which orthodontic patients decided to shift to another type of orthodontic appliance, among conventional metal brackets, ceramic brackets, lingual brackets and clear aligner, based on their personal experiences of pain, ulcers, bad breath, hygiene issues and social difficulties. MATERIAL AND METHODS: This study comprises of patients seeking orthodontic treatment. The sample (n = 500; age group = 19-25 years) was divided equally into four groups based on the treatment modality: conventional metal brackets, ceramic brackets, lingual brackets and clear aligner. Patients rated the questionnaire using a visual analogue scale, to assess variables (such as pain, ulcer etc) that impact various treatment modalities. Subsequently, patients from all groups provided feedback regarding their treatment experiences, and expressed their preference for an alternative modality. Intergroup comparison among the four groups was done using one-way analysis of variance with Tukey's HSD post-hoc test (p ≤ 0.05). RESULTS: Patients who received lingual brackets reported higher levels of pain and ulceration, as compared to those who received clear aligners. All four groups showed statistically significant differences for ulcers during treatment (p ≤ 0.05). Of the 125 patients who received conventional metal brackets, 28% expressed a preference for clear aligner therapy, while 20% preferred ceramic brackets. In the lingual group, 56% of 125 patients preferred clear aligner therapy, and 8% preferred ceramic brackets to complete their treatment. In the ceramic group, 83% did not want to switch, whereas 17% desired to switch to clear aligner, while in aligner group no patient desired to switch. CONCLUSIONS: A higher percentage of patients from lingual brackets group chose to shift to clear aligners, followed by conventional metal brackets group and by ceramic brackets group, in this descending order. The clear aligner group demonstrated fewer issues than the other treatment modalities.

Assessment of the quality and accuracy of information contained within the websites of marketed orthodontic products: a cross-sectional investigation.

OBJECTIVES: To assess the quality and accuracy of information contained within the websites of providers of marketed orthodontic products. MATERIALS AND METHODS: Twenty-one websites of orthodontic appliance and adjunct (product) providers were identified. The website content was assessed via two validated quality-of-information instruments (DISCERN and the Journal of the American Medical Association [JAMA] benchmarks) and an accuracy-of-information instrument. Website content was qualitatively analyzed for themes and subthemes. RESULTS: More than half (n = 11; 52.3%) of the assessed websites contained clinician testimonials. The mean (SD) DISCERN score was 33.14 (5.44). No website recorded the minimum of three JAMA benchmarks required to indicate reliability. The most common content themes related to quality-of-life impact and treatment duration. Just 8% of the statements within the websites were objectively true. The Pearson correlation coefficient indicated that the DISCERN scores were correlated with the accuracy-of-information scores (r = .83; P < .001). CONCLUSIONS: The quality and accuracy of information contained within the websites of the providers of marketed orthodontic products was poor. The combined use of DISCERN and the accuracy-of-information instrument may help overcome the shortcomings of each. Clinicians should check the accuracy of information on orthodontic product provider websites before adding links to those websites on their own sites.

Adult orthodontics, motivations for treatment, choice, and impact of appliances: A qualitative study.

INTRODUCTION: Understanding the rationale for adult patients undertaking orthodontic treatment and the impact of appliances on their quality of life has become increasingly important to research efforts and clinical care. This study aimed to understand why adult patients undergo orthodontic treatment and their overall experience with the choice of appliance. METHODS: A cross-sectional qualitative study using semistructured interviews with adult patients from 4 private specialist orthodontic practices in the London region involving a purposive homogeneous sampling technique to obtain variation regarding gender, treatment modalities (fixed ceramic [FC], removable aligner [RA], and fixed lingual [FL] appliances), and stages of treatment (early, late, and posttreatment stage) was undertaken. A piloted topic guide was used to standardize data collection. Interviews were audio recorded, and field notes were taken. Data were transcribed verbatim and analyzed using framework methodology until data saturation was reached. RESULTS: A total of 22 participants (FC, 8; RA, 8; and FL, 6), with a mean age of 38.9 ± 11.7 years, with the majority being female (n = 13; 59.1%), were interviewed. Psychosocial and dental health-related factors were reported as the main reasons to seek orthodontic treatment. Social factors and appliance features influence an adult's decision-making in selecting a specific orthodontic appliance. Wearing FC, RA, and FL was seen to have both positive and negative impacts on an adult's quality of life. Functional and psychological factors were the strong influencers on patients' treatment experience. CONCLUSIONS: The study highlighted the influence of psychosocial factors and dental health concerns in the decision-making processes of adults seeking orthodontic treatment. FC, RA, and FL appear to affect an adult's quality of life, with functional and psychosocial factors being commonly reported.

Metal leakage from orthodontic appliances chemically alters enamel surface during experimental in vitro simulated treatment.

Human enamel is composed mainly of apatite. This mineral of sorption properties is susceptible to chemical changes, which in turn affect its resistance to dissolution. This study aimed to investigate whether metal leakage from orthodontic appliances chemically alters the enamel surface during an in vitro simulated orthodontic treatment. Totally 107 human enamel samples were subjected to the simulation involving metal appliances and cyclic pH fluctuations over a period of 12 months in four complimentary experiments. The average concentrations and distribution of Fe, Cr, Ni, Ti and Cu within the enamel before and after the experiments were examined using ICP‒MS and LA‒ICP‒MS techniques. The samples exposed to the interaction with metal appliances exhibited a significant increase in average Fe, Cr and Ni (Kruskal-Wallis, p < 0.002) content in comparison to the control group. The outer layer, narrow fissures and points of contact with the metal components showed increased concentrations of Fe, Ti, Ni and Cr after simulated treatment, conversely to the enamel sealed with an adhesive system. It has been concluded that metal leakage from orthodontic appliances chemically alters enamel surface and microlesions during experimental in vitro simulated treatment.

Sustained antibacterial activity of orthodontic elastomeric ligature ties coated with a novel kombucha-derived bacterial nanocellulose: An in-vitro study.

Incipient carious lesions, the most common complication in orthodontic patients with fixed appliances, call for the development of novel preventive dental materials that do not rely on patient adherence. The present study aimed to assess the ability of elastomeric ligatures coated with bacterial nanocellulose (BNC) to deliver sustained antibacterial activity, during the standard 28-day interval between orthodontic appointments, without compromising their mechanical properties. Kombucha membrane was used to produce cellulose as a secondary product from the fermentation of tea broth with symbiotic bacteria and yeast culture. Characterization of BNC-coated elastomeric ligatures was performed using Fourier Transform Infrared Spectroscopy and Energy Dispersive Spectroscopy analysis. The samples were pre-treated by immersion first in isopropyl alcohol, then in 8 mL nanocellulose solution for 7 days. Tensile strain and strength of the BNC-coated and conventional ligatures were evaluated using a tensile testing machine. Direct contact and agar diffusion tests were performed to assess the antibacterial activity of nanocellulose. In addition, the release profile of BNC was evaluated. Data analysis was performed by one-way analysis of variance (ANOVA) followed by post-hoc Tukey's test and Wilcoxon signed-rank test. P values less than 0.05 was regarded as significant. There was no statistically significant difference in tensile strain and strength between the BNC-coated and conventional ligatures. The coated ligatures provided sustained antibacterial activity during the required 28 days. The use of BNC-coated elastomeric ligatures in patients with fixed orthodontic appliances might be a promising solution to plaque formation and subsequent enamel decalcification.

Evaluation of the antibacterial effect of titanium dioxide nanoparticles combined with acrylic laminates for functional orthodontic appliances: a randomized controlled clinical trial.

BACKGROUND: The objective of this study was to evaluate the antibacterial effect of titanium dioxide nanoparticles incorporated into the acrylic baseplates of the maxillary part of twin block appliances in orthodontic patients during the treatment period. MATERIALS AND METHODS: Twenty-six patients were selected randomly and divided into two groups(n = 13). Test group patients used orthodontic functional appliances containing 1% titanium dioxide nanoparticles in acrylic baseplates. Control group patients used orthodontic functional appliances without titanium dioxide nanoparticles in acrylic baseplates. Swap samples were taken from the palatal gingiva facing the fitting surface of the acrylic component of the maxillary part of a twin block appliance for each patient at five-time intervals (baseline sample, after one, two, four, and six months) and then cultured in blood agar plates to calculate bacterial colony count. The Mann‒Whitney U test and the Friedman test were used to compare data. Bonferroni correction (p value ≤ 0.05) was applied to detect significant differences. THE RESULTS: showed a decrease in the bacterial colony count in the test group compared to the control group. Pairwise comparisons revealed a statistically significant difference in samples after four- and six-month groups (p values = 0.002 and 0.011, respectively) vs. the one-month test group. A higher statistically significant difference was observed in the six-month group (p-value = 0.037) vs. the baseline group in the control group. CONCLUSION: The addition of 1% titanium dioxide nanoparticles to acrylic baseplates of orthodontic functional appliances significantly reduced the bacterial colony count under the base plate after at least four months of application.